Manualshelf

user manual

ManualsBrandsMocomtech ManualsNetwork HardwareCo. Ltd. Network Hardware CiM-25/600L
111112113114115116117118119120
CiM-25/600L IP Enabled M&C Rev. 1
SNMP Interface CD/CIM25600L.IOM
96
A.6.65 EDMACFRAMINGMODE
Name
edmacFramingMode
OID
1.3.6.1.4.1.6247.21.1.6.1
Full path
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600l(21).cdm600lObjects(1).utilityParameters(6).edmacFramingM
ode(1)
Module
CDM600L
Parent
utilityParameters
Next sibling
edmacAddress
Type
OBJECT-TYPE
Numerical syntax
SNMP_SYNTAX_INT
Base syntax
INTEGER
Composed syntax
INTEGER
Status
current
Max-access
read-write
Value list
1
idle(0)
2
master(1)
3
slave(2)
Description
EDMAC Framing Mode. (EFM?, EFM=)
A.6.66 EDMACADDRESS
Name
edmacAddress
OID
1.3.6.1.4.1.6247.21.1.6.2
Full path
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600l(21).cdm600lObjects(1).utilityParameters(6).edmacAddress(2
)
Module
CDM600L
Parent
utilityParameters
Prev sibling
edmacFramingMode
Next sibling
unitTestMode
Type
OBJECT-TYPE
Numerical syntax
SNMP_SYNTAX_INT
Base syntax
INTEGER
Composed syntax
INTEGER
Status
current
Max-access
read-write
Size list
1
0..9999
Description
Edmac Slave Address Range. (ESA?, ESA=)
This command is only valid for an EDMAC master. When used as a
Query, it may be sent to an EDMAC slave, which will respond with the
appropriate address.