user manual

CiM-25/600L IP Enabled M&C Rev. 1

Introduction CD/CIM25600L.IOM

The CiM-25 uses flash technology providing support for a wide variety of products from

a single hardware platform. The CiM-25 either currently or will in the near future

support the following Comtech EF Data equipment:

 Modems

SDM-300L1* SDM-8000* CDM-600L*

SDM-300L2* SDM-300A/SLM-3650* SDM-2020D*

SDM-300L3 CDM-550T SDM-9000*

SDM-2020M* CDM-600*

 Frequency Converter

UT4500 series 1 kHz and 125 kHz step size Up Converters*

DT4500 series 1 kHz and 125 kHz step size Down Converters*

*Requires an external 5 Vdc Power Supply (universal AC input). See section 2.3.1,

Powering the CiM-25.

1.2 SPECIFICATIONS

SYSTEM SPECIFICATIONS

Ethernet Interface 10base T (RJ-45)

Equipment Interface DB9 Female on CiM-25F

DB9 Male on CiM-25M

ENVIRONMENTAL AND PHYSICAL

Temperature Operating: 0 to 50º C

Storage: -25 to 70º C

Power Supply 4.75 to 5.25 Vdc

Power Consumption 0.9 W typical, 1.5 W maximum

Physical Dimensions L=110, W=43, H=20 (mm)

L=4.3, W=1.7, H=0.8 (inches)

Weight < 1 lbs

CE Approvals EN55022 Class B (Emissions)

EN50082-1 Part 1 (Immunity)

EN60950 (Safety)

FCC Approval FCC Part 15 Class B