user manual

CiM-25/600L IP Enabled M&C Rev. 1
Operation CD/CIM25600L.IOM
29
3.5.1.2 CHANGE HOST ALLOW LIST
Using the !HA command, the Administrator can modify the Host Allow List. The
command protocol for this command is as follows:
Format: !HA <address index> <ip_address> <ranged>
Where: address index is 1 to 6, ranged is 0 if No and 1 if yes
Example: !HA 5 10.50.91.200 0
This sets IP address #5 to 10.50.91.200 and indicates addresses #5 & #6 are NOT ranged.
Query Format: !HA ?
Response: IP 1: 000.000.000.000 IP 2: 255.255.255.255 Range = yes
IP 3: 000.000.000.000 IP 4: 000.000.000.000 Range = no
IP 5: 000.000.000.000 IP 6: 000.000.000.000 Range = no
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.3 CHANGE ADMINISTRATOR NAME
Using the !AD command, the Administrator can change the Administrator login Name.
The command protocol for this command is as follows:
Format: !AD <string>
Where: <string> can be any alphanumeric string of length 4 to 10 characters
Query Format: !AD ?
Response: !AD <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.4 CHANGE ADMINISTRATOR PASSWORD
Using the !PW command, the Administrator can change the Administrator login
Password. The command protocol for this command is as follows:
Format: !PW <string>
Where: <string> can be any alphanumeric string of length 4 to 10 characters
Query Format: !PW ?
Response: !PW <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.