user manual

CiM-25/600L IP Enabled M&C Rev. 1
Operation CD/CIM25600L.IOM
32
3.5.1.11 CHANGE PRIMARY/SECONDARY DNS IP ADDRESSES
Using the !DN command, the Administrator can set the primary and secondary DNS IP
Addresses. The command protocol for this command is as follows:
Format: !DN <primary DNS IP Address> <secondary DNS IP Address>
Response: Command Successful
Query Format: !DN ?
Response: !DN <primary DNS IP Address> <secondary DNS IP Address>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.12 CHANGE SMTP DOMAIN NAME
Using the !SN command, the Administrator can set the SMTP domain name. The
command protocol for this command is as follows:
Format: !SN <string>
Response: Command Successful
Where: <string> can be any alphanumeric string with a length of 1 to 100
characters.
Note:
disabled in the <string> field disables SMTP.
Query Format: !SN ?
Response: !SN <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.13 CHANGE SMTP DOMAIN IP ADDRESS
Using the !SD command, the Administrator can set the SMTP Domain IP Address. The
command protocol for this command is as follows:
Format: !SD <ip_address>
Response: Command Successful
Note:
An IP Address of 0.0.0.0 disables SMTP.
Query Format: !SD ?
Response: !SD <ip_address>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.