user manual

CiM-25/600L IP Enabled M&C Rev. 1
Operation CD/CIM25600L.IOM
37
3.6.5 CHANGING SERIAL NUMBER
Perform the following:
1
Enter the following command:
Command: <0/SNM=xxxxxxxxx’cr’
Where x is the Serial Number as shown on the label of the CiM-25.
Response: >0/SNM=
Example: >0/SNM=022080125A’cr’
2
To query the Serial Number enter: >0/SNM?’cr’
IMPORTANT
The Serial Number is unique to this unit. Change only under the factory
direction or if it does not match the label.