Specification Sheet

PLYWOOD BLADES
Plywood blades are constructed of furniture grade veneers, painted or stained
as shown here. Natural variations may exist in woodgrains and finishes.
Aluminum Maple MahoganywBlack
White
Brushed
Aluminum
Dark
Bronze
Gloss
White
FAN FINISHES
Dark Bronze with
Mahogany Blades
and 271 LED
Light
Brushed Aluminum
with Maple Blades
(no light)
Gloss White with
White Blades
(no light)
D O W N R O D S
The Altus ships standard with 4.5” and 16”
down rods. Use the following part numbers
to order accessory down rods.
Finish Length
#DRD –
–
 
GW
Gloss White
12
12”
BA
Brushed Aluminum
24
24”
DB
Dark Bronze
36
36”
48
48”
60
60”
72
72”
SLOPE ADAPTER
The Altus will accommodate ceiling
slopes up to 33 degrees. The #045
slope adapter can accommodate slopes
exceeding 33 degrees and up to
45 degrees.
Finish
#045 –

GW
Gloss White
BA
Brushed Aluminum
DB
Dark Bronze
The Modern Fan Co. tel [phone] toll free 888-588-3267 email [e-mail] website modernfan.com
Altus
#FC- 009A / #FC- 009B
Multi-fan Speed Controls
for AC Fans
(no lights)
Sold as an accessory item,
providing three speeds for multiple
AC fans on a single switch leg.
FC-009A for 2-3 fans
FC-009B for 3-6 fans
Note: Not compatible with remote
control. Control of fan lights
must be accounted for separately
with owner provided control on
separate switch leg.
#FC- 002
Fan & Light Control −3 Wire
For a single AC fan with LED light,
providing four speeds and dimming
function. Requires three wires from
switch location to fan. Note: Not
compatible with remote control.
#FC- 003- LED
Handheld Remote RF Control
Designed for independent operation
a single AC fan or AC fan with LED
light, providing three speeds and full
range dimming (or “on/off” switching),
using only one circuit (two wires).
Includes RF handset, receiver, battery
and comes with a wall mounting
bracket for handset.
#FC- 001
Fan Speed Only Control
(no light)
For a single AC fan, providing
four speeds. Not intended for
a fan with light. Note: Not com-
patible with remote control.
#FC- 004- LED Fan & Light
RF Control−2 Wire
Designed for independent opera-
tion of a single AC fan or AC fan
with LED light, providing three
speeds and full range dimming
(or “on/off” switching), using only
one circuit (two wires). Includes
RF wall control (with master power
switch), switch plate and receiver.
ALTUS FAN CONTROLS
Selection of a control option is made at time of order and incorporated into the fan item
number (except #FC-009A and #FC-009B which are sold as accessory items).
#FC- 005- LED
Wall/Remote Combo
RF Control−2 Wire
Designed for independent
operation of a single AC fan
or AC fan with LED light,
providing three speeds and
full range dimming (or “on/
off” switching), using only one
circuit (two wires). Includes
RF handset, RF wall control
(with master power switch),
switch plate and receiver.