Specification Sheet

Arbor Flush DC
Dark Bronze with
Ebony Blades and
870 LED Light
Graphite with
Mahogany Blades
(no light)
Gloss White with
Whitewash Blades
(no light)
ARBOR FLUSH DC CONTROLS
Arbor Flush DC controls use RF transmission to a receiving unit included with each fan,
providing six speeds, reversing and light function (on/off or dimming). Control selection
is made at time of order and incorporated into fan item number. Controls utilize
dedicated (unique) RF channels to avoid interference with other ceiling fans installed
nearby. The wall control (if ordered) also includes a master power switch.
The Modern Fan Co. tel [phone] toll free 888-588-3267 email [e-mail] website modernfan.com
Wall Control (WC)
Remote Control (RC) Wall/Remote Combo (CC)
* The Arbor Flush DC must use one of the above control options. Third party fan controls
are not compatible with this product. The Remote Control (RC) can be used in combination
with a standard power switch (on-off) in wall box.
** Wall control unit is designed for operation of a single fan/fan light only. For multiple units on
a single switch leg, the remote control option can be used if the fans are within suitable range.
Contact Modern Fan customer support with questions or for additional guidance.
*** To replace lost or damaged control components or to add secondary control to existing
control sets (e.g. to add a handset to an existing wall control system), contact Modern
Fan Co. customer support for ordering guidance.
FAN FINISHES
SOLID WOOD BLADES
Solid wood blades are CNC milled from a light-weight and stable,
plantation grown Paulownia, then hand-finished as shown here.
Graphite Dark Bronze Gloss White
Graywash MahoganyMapleEbony Whitewash
M O U N T I N G
The Arbor Flush DC installs with a flat
mounting plate (included) for attachment to
an appropriately rated junction box.
The Arbor Flush DC is intended for flat,
low ceilings (approximately 8’0”).
For higher ceilings and/or for sloped
ceilings, please select from one of our
down rod suspended models.