Installation Guide

FH-W1802Vox Instructions20
8. Installing the LED Luminaire Module
WARNING: Before starting installation, disconnect the power
by turning o the circuit breaker or removing the fuse at fuse box.
1. Remove 3 screws from the outer perimeter of the adapter plate
and keep for future use.
2. Raise and hold the LED luminaire module close to the adapter
plate and proceed to secure the wire connections. Connect the
white wire connectors from the luminaire module to the white
wire of the fan. Connect the blue wire from the fan to the black
wire from the LED module.
3. Tuck connections neatly into mounting plate. Place the luminaire
module against the adapter plate and secure with the 3 screws
previously removed.
4. Raise glass shade up against the luminaire module, and secure
it to fan by turning acrylic shade clockwise until snug. Do not
overtighten.