Installation Guide

10FH-W1803
7. MAKING THE ELECTRICAL CONNECTIONS (cont.)
FIGURE 8
Red (to motor)
Gray (to motor)
Yellow (to motor)
Yellow (motor)
Gray (motor)
Red (motor)
Receiver
White (for light)
White (for light)
Blue (for light)
Blue (for light)
Motor to receiver electrical connections: (Fig. 8)
Place motor on at surface before connecting receiver wires.
1. Connect the red wire from the fan to the red wire marked “TO
MOTOR” from the receiver.
2. Connect the gray wire from the fan to the gray wire marked “TO
MOTOR” from the receiver.
3. Connect the yellow wire from the fan to the yellow wire marked
“TO MOTOR” from the receiver.
4. Connect the white wire from the fan to the white wire marked
“For Light” from the receiver.
5. Connect the blue wire from the fan to the blue wire marked “For
Light” from the receiver.
6. Drop the receiver into the motor assembly, at side up.