Installation Guide

9FH-W1803
7. MAKING THE ELECTRICAL CONNECTIONS
Trim Ring
WARNING: To avoid possible electrical shock, be sure electricity is
turned o at the main fuse box before wiring.
WARNING: Installation of this fan requires that a three-conductor ca-
ble (including ground wire) be run between ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire nuts, except for the
ground wire.
Place trim ring onto the canopy. Opening of 4 clips facing up
(Fig. 7)
The at side of the receiver should face the ceiling.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts with your fan. Secure the
plastic wire nuts with electrical tape. Make sure there are no
loose strands or connections.
FIGURE 7