NIRVANA 56” FR-W1916-56L INSTALLATION INSTRUCTIONS modernforms.
All Modern Forms fans are: WET SMART Durably finished and rated for indoor and outdoor use Integrates with smart devices for remote and voice activated control Wet location-listed and manufactured to the strictest ETL/cETL safety regulations DC MOTOR Quiet, reliable, and up to 70% more efficient than AC fans App Instructions And Smart Home Device Integration FREE APP DOWNLOAD Sync with our exclusive Modern Forms app to control fan speed, use smart features like Adaptive Learning, create groups and r
Table Of Contents 16 Troubleshooting..................................................................................................................................................................... 4 6 6 7 8 9 10 11 13 15 17 18 19 20 24 26 17 Accessories................................................................................................................................................................................ 28 1 Safety Rules.......................................................
1. Safety Rules For operation, maintenance, and troubleshooting information, visit modernforms.com/help. 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. 6. To avoid personal injury or damage to the fan and other items, please be cautious when working around or cleaning the fan. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70” and local electrical codes.
WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by Modern Forms. Substitution of parts or accessories not designated for use with this product by Modern Forms could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
2. FTC Energy Guide & Specifications FAN FAN SIZE VOLTS N.W (lbs) G.W (lbs) NIRVANA 56” 120 17.17 29.45 STANDARD ELECTRICITY AIR FLOW ENERGY COSTS* FAN EFFICACY High Speed 28W 6783 CFM $8/yr 244 CFM/W Weighted Average 16W 4264 CFM $5/yr 265 CFM/W NOTE: These are approximate measures. They do not include amps and wattage used by the light kit. 3.
4. Package Contents Unpack your fan and check the contents. You should have the following items: REF. DESCRIPTION PART NO. A Blade Set of 3 (3B1) RPL-F1916-56-BD-** B Blade Holder Ring --- C Hanger Assembly RPL-HGR-ASM-** Hanger Bracket RPL-CAN-RND.
5. Mounting Options Support Brace Joist CAUTION: To prevent electrical shock, ensure electricity has been turned off at the circuit breaker before beginning. If there isn’t an existing UL/cUL listed outlet box, please refer to the following instructions. Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials. The outlet box and support structure must be able to fully support the moving weight of the fan (at least 35 lbs/15.9 kg).
6. Installing The Mounting Bracket Remember to disconnect the power at the circuit breaker. 1. Remove 1 of 2 screws from the bottom of the mounting Mounting Bracket bracket and save for use in section 11. Loosen the other screw (FIG.5). 2. Pass the 120-volt supply wires through the center hole in the mounting bracket as shown (FIG.6). 3. Screw Secure the mounting bracket to the ceiling outlet box with the FIG.5 screws and washers provided with your outlet box.
7. Attaching The Fan Blades 1. Place blade on motor and secure with the blade FIG.7A attachment screws and washers (FIG.7A). 2. Repeat this procedure with the remaining blades . 3. Turn fan assembly over and secure the top of the blades together using the blade collector ring and hardware provided (FIG.7). 10 FIG.
8. Hanging The Fan Assemble upper housing to motor assembly using the 6 screws provided (FIG. 8). 1. Take out the screw located in the hanger ball, lower the hanger ball and remove the cross pin. Remove the hanger ball from the hanger ball/downrod assembly. 2. Remove the clevis pin and cotter pin and loosen the two collar screws from the motor collar. 3. Feed motor wires and safety cable through coupling cover, canopy ring, and canopy. 4.
8. Hanging the fan (cont.) 1. Carefully lift the fan motor assembly up to the mounting bracket and seat the hanger ball in the mounting bracket socket. Make sure the tab on the mounting bracket socket is properly seated in the groove in the hanger ball (FIG.9). Rotate the socket assembly until the ball drops and locks into the hanger bracket screw. 2. Secure the safety cable to the building structure using spring washer, flat washer, and wood screw provided. FIG.
9. Making the Electrical Connections Remember to disconnect the power at the circuit breaker. CAUTION: If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician. NOTE: Installation of this fan requires that a three-conductor cable (including ground wire) be run between ceiling and wall outlet boxes. 1. Mounting Bracket Insert the receiver into the mounting bracket with the flat side of the receiver facing the ceiling (FIG.10).
9. Making the Electrical Connections (cont.) Motor to receiver electrical connections: (FIG.11) 1. Connect the hanger ball/downrod assembly ground wire, mounting bracket ground wire and receiver ground wire to the ground wire in the ceiling outlet box. WARNING: Failure to connect ground wires could result in poor fan control functionality. 2. Connect the red wire from the fan to the red wire marked “TO MOTOR” from the receiver. 3.
10. Installing the Wall Control Remember to disconnect the power at the circuit breaker. NOTE: Wall control is intended for indoor installation only. You can control your fan with up to 4 wall controls or remotes (including the pre-paired control). Wall control to wall outlet box electrical connections (FIG.12): 1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that feeds back to the circuit breaker – important for proper fan function. 2.
10. Installing the Wall Control (cont.) Remember to disconnect the power at the circuit breaker. 1. Carefully tuck the wire connections inside the outlet box. Secure the wall control with the 2 wall control screws provided (FIG.13). 2. Attach the wall mounting plate over the wall control and secure with the 2 wall mounting plate screws provided. 3. Fasten the wall plate to the wall mounting plate.
11. Finishing the Installation 1. Secure all wire connections with supplied wire ties to assist in canopy installation. 2. Tuck connections neatly into ceiling outlet box. 3. Slide the canopy up to mounting bracket and place the key hole on the canopy over the screw on the mounting bracket. Turn canopy until it locks in place at the narrow section of the key holes (FIG.14). 4. Align the circular hole on canopy with the remaining hole on the mounting bracket.
12. Installing the Adapter Plate Remember to disconnect the power at the circuit breaker. 1. Remove 1 of 3 pre-installed screws from the mounting ring and loosen the other screws (do not remove). 2. Place key holes in the adapter plate over the 2 screws previously loosened from the mounting ring. Turn the adapter plate until the adapter plate locks in at the narrow section of the key holes (FIG.15). 3.
13. Installing the LED Luminaire Module (optional) WARNING: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning power off using the fan switch is not sufficient to prevent electrical shock. FIG.16 CAUTION: To reduce the risk of electric shock, disconnect the electrical supple circuit to the fan before installing light kit. NOTE: If you do not plan to install the luminaire module with your fan at this time, skip to step 4. 1.
14. Wall Control Operating Instructions Restore power to ceiling fan and test wall control as below for proper operation. Pairing the wall control to your fan Your fan is pre-paired at the factory. No pairing is necessary. NOTE: For pairing instructions please skip to the “Pairing” section. Wall Control Button Functions button: Turns the light ON or OFF. Press or hold to increase the light level. Press or hold to decrease the light level. button: Turns the fan ON or OFF.
14. Wall Control Operating Instructions (cont.) Summer Mode Winter Mode (counter-clockwise): A downward airflow creates (clockwise): An upward airflow moves warm air off the ceiling area a cooling effect (FIG.18). This allows you to set your air conditioner and redistributes the warm air that hovers around the ceiling to the on a warmer setting without affecting your comfort. living space. This should allow for savings on heating costs (FIG.19).
14. Wall Control Operating Instructions (cont.) Pairing Unpairing If you need to re-pair your fan or you want to pair a second wall NOTE: Purging must be completed within 3 minutes of turning the control: power on to the fan receiver. 1. 1. Power cycle your fan by turning off the power at the When you re-engage power to the fans you want to purge, circuit breaker. 2. Press and hold press and hold the and buttons on wall control for 2. and buttons for 4 seconds.
14. Wall Control Operating Instructions (cont.) Factory Reset NOTE: This will remove wall control and app connections. Press and hold the 1. , and buttons for 10 seconds. The LED will blink red and return to solid red, and the receiver will beep to indicate that the factory reset is successful. Receiver Button Factory Reset 1. Press the button on the receiver until the wall control beeps (FIG.21). NOTE: This will remove wall control and Modern Forms app connections. FIG.
15. Application In addition to the included wall control, you can control your fan through the Modern Forms app. 1. To use this app, download it for free from the App Store or Google Play. 2. Open the app to create your account. You can also log in using your Facebook or Google account. 3. Next, set up a Wi-Fi connection. You’ll need the SSID and Wi-Fi password for the network you wish to connect to. 4.
5. The Modern Forms app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the Modern Forms app instructions for more details. NOTE: A maximum of 2 fans can operate on a circuit through the wall control.
16. Troubleshooting Problem Solution Fan will not start. 1. Check all electrical connections and ensure proper contact. WARNING: Before checking any electrical connections, ensure electricity has been turned off at the circuit breaker before beginning. 2. Check wall control LED indicator light. If LED indicator light is not illuminated when pushing a button, it is not transmitting a signal.
Problem Fan sounds noisy. Solution 1. Allow a 24-hour “breaking in” period. Most noise associated with a new fan will disappear during this time. 2. Make sure all motor housing screws are securely fastened. 3. Make sure the screws that attach the fan blades to the fan are securely fastened. 4. Make sure the screws securing the LED luminaire module are securely fastened. 5.
17.
Product Model Description FR- W1 9 1 6 - 5 6 L Finish XF-12 12” in downrod AS, CFI, LN, SS, BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-18 18” in downrod AS, CFI, LN, SS, BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-24 24” in downrod AS, CFI, LN, SS, BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-36 36” in downrod XF-48 48” in downrod XF-60 60” in downrod AS, LN, SS, BZ, DW, GB, GH, GW, MB, MW, OB, TT XF-72 72” in downrod AS, LN, SS BZ, DW, GB, GH, GW, MB, MW, OB, TT Downrod All our downrods are w”I.D.
Get Smart works with the Google Assistant The Modern Forms app synchronizes seamlessly with smart home devices you already own. To learn more go to modernforms.com/mfappins Free App Download Sync with our exclusive Modern Forms App to control fan speed, use smart features like Adaptive Learning, create groups and reduce energy costs.
Español For instructions in Spanish please visit the link below. Para obtener instrucciones en español, visite el siguiente enlace. www.modernforms.com/fan-instructions-espanol Français For instructions in French please visit the link below. Pour obtenir des instructions en français, veuillez visiter le lien ci-dessous. www.modernforms.
FR-W1916-56L modernforms.