Product Brochure

6-175.7

Finger Proof Fan Guard (STD thru 125, OPT 150-400)

Propeller units may be equipped with an optional finger

proof fan guard for added protection. The finger proof

fan guard is installed at the factory in place of the standard

fan guard.

Blower Motor - (STD for HDC/BTS Models)

The blower motor is factory installed on the blower housing.

Blower motors smaller than 3 HP are factory installed on the

blower housing. Motors 3 HP and above are shipped loose

for field installation to prevent damage during shipment.

For blower models 60-125, the blower is direct driven by a

3-speed motor. For blower models 150-400, the blower motor

is supplied with an adjustable sheave that can be used to

increase/decrease the blower RPM, and the blower motor

can be provided in a variety of supply voltages and motor

horsepowers.

Horizontal Air Deflector Blades (STD)

Factory mounted on the discharge of the unit, the blades can

be adjusted to provide horizontal (up and down) delivery control

of the heated air. Vertical deflector blades are available as a

field installed accessory.

Blower Enclosure (OPT for HDC/BTS Models)

Filter Rack (OPT for HDC/BTS Models)

Provides filtration of air to be heated. Must include Blower

Enclosure accessory.

Figure 5.1 - Factory Mounted Standard and Optional Features

181(outlet) (inlet)

DESIGN FEATURES - ALL MODELS