Installation Guide

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: (440) 962 -2000  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International
Paper Holder posts are die cast from
highest quality zinc alloy (zamac).
Castings are triple plated with a
polished brass or polished chrome
finish. 2050 roller is chrome plated
plastic. 2080 roller is white plastic.
Both rollers are spring loaded.
 2050CH – Paper Holder
Polished Chrome Finish
Concealed Screw Mounting
Matching Roller
 2080CH – Paper Holder
Polished Chrome Finish
Concealed Screw Mounting
White Roller
 2080PB – Paper Holder
Polished Brass Finish
Concealed Screw Mounting
Matching Roller
Cleaning Instructions:
1. Remove mounting brackets from back of fixtures by loosening the set
screws.
2. Position assembled unit on wall in desired location.
3. Lightly mark the outlines of the bases of the unit.
4. Center mounting brackets inside the outline.
5. Mark hole locations. Attach brackets to wall using 1 3/8” screws
(provided).
6. Mount bases on brackets. Tighten set screws on the bottoms.
Note: Wood blocking is preferable behind all wall surfaces.
If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts.
Stock Number:______________________Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
2050, 2080
Contemporary Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA0991