Specification Sheet
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
•
Lever style handles
•
Maximum handle rotation angle is 90˚ to full on for either handle
•
Hot side counterclockwise to open (clockwise to close)
•
Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
WYNFORD™
Two Handle Centerset Faucet Trim
Models: 4505 series (lever handle
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1" (25mm) MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 1/16
4-1/4"
(108mm)
13/16"
(21mm)
5-3/4"
(146mm)
4-1/2"
(114mm)
4-1/4"
(108mm)
2-1/2"
(63mm)
4"
(102mm)
6-3/8"
(162mm)
3"
(76mm)
Lift Rod
COLD
1/2" NPT
HOT
1/2" NPT
MAX. DECK
THICKNESS
1-3/16" (30mm)
MOENMOEN
There is more than 1 version of this model.
Page down to identify the version you have.