Dimensions Guide

DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1, CSA B125.1, and all
applicable requirements referenced therein including NSF61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
WYNFORD™
Two Handle Centerset Faucet Trim
Models: 4505 series (lever handle
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1" (25mm) MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 7/15
4-1/4"
(108mm)
13/16"
(21mm)
5-3/4"
(146mm)
4-1/2"
(114mm)
4-1/4"
(108mm)
2-1/2"
(63mm)
4"
(102mm)
6-3/8"
(162mm)
3"
(76mm)
Lift Rod
COLD
1/2" NPT
HOT
1/2" NPT
MAX. DECK
THICKNESS
3/4" (19mm)
MOENMOEN
There is more than 1 version of this model.
Page down to identify the version you have.