Dimensions Guide

ManualsBrandsMoen ManualsIndoor Furnishing4601

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes metal/50/50 pop-up type waste assembly where noted

OPERATION

• Knob style handle

• Pull-on/Push-off

• Temperature controlled through 180˚ degree arc

of handle travel

FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made

before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1225 cartridge design

• Nonmetallic/nonferrous and stainless steel material

• Can accommodate reversed piping and back to back installations

STANDARDS

• Third party certified to WaterSense,® CSA B-125.1, ASME A112.18.1 and

all applicable requirements referenced therein including NSF61/9

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to

the original consumer purchaser

• 5 year warranty if used in commercial installations

NOTE:THIS FAUCET IS DESIGNED TO BE

IN STALLED THRU 3-1" DIA. HOLES, 2" ON CENTER

CHATEAU®

Single-Handle Lavatory Faucet

with Metal Waste Assembly

Models: 4621 series

Bulk Pack (12 Per Carton): 64620 series

with 50/50 Waste Assembly

Bulk Pack (12 Per Carton): 64621 series

Less Waste

Model: 4601 series

Bulk Pack (12 Per Carton): 64601 series

SPACER

PROVIDED –

DISCARD IF

MOUNTING

SURFACE IS

MORE THAN

3/4" THICK

1-3/4"

(45mm)

MAX.

(25mm)

1/2" IPS

ADAPTER

(25mm)

3-5/8"

(92mm)

5" (127mm)

OPEN POSITION

1-3/4"

(45mm)

DECK PLATE

TOP OF

MOUNTING

SURFACE

6" (152mm)

(ESCUTCHEON WIDTH

(25mm)ESC.

WIDTH

LIFT

ROD

Rev. 10/10

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN