Specification

ManualsBrandsMOEN ManualsKitchen ApplianceChateau 2-Handle Bar Faucet in Chrome

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

Rev. 11/14

There is more than 1 version of this model.

Page down to identify the version you have.

(50mm)

2-7/8"

(73mm)

(50mm)

ESCUTCHEON DIA.

6-7/16" x 2-1/2"

(164mm x 64mm)

7-1/8"

(181mm)

10-1/2"

(267mm)

4-9/16"

(116mm)

COLD

1/2" NPT INLET

HOT

1/2" NPT INLET

1"(25mm)

MAX. DECK

THICKNESS

MOEN®

Two-Handle Bar Faucet

Models: 4903 series

NOTE: Designed to be installed through

2 - 1” min. dia. holes 4” on center

DESCRIPTION

• Metal construction with various finishes identified by suffix

OPERATION

• Mini blade style handles with hot and cold color indicators

• Inlet shanks will accept 3/8” ball nose connections

FLOW

• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

CARTRIDGE

• 1224 cartridge design

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1

and all applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • Metal construction with various finishes identified by suffix OPERATION • • Mini blade style handles with hot and cold color indicators Inlet shanks will accept 3/8” ball nose connections FLOW • Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi CARTRIDGE • 1224 cartridge design STANDARDS • • • • Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • Chrome plated metal construction OPERATION • Small lever style FLOW • Aerator is limited to 2.0 gpm (7.6 L/m) ADA CARTRIDGE • 1224 cartridge design STANDARDS • • • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.