Specification Sheet

ManualsBrandsMOEN ManualsKitchen ApplianceChateau 2-Handle Bar Faucet in Chrome

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

Rev. 9/04

NOTE: Designed to be installed through

2 - 1” min. dia. holes 4” on center

There is more than 1 version of this model.

Page down to identify the version you have.

MOEN

Two-Handle Bar Faucet

Models: 4903, 4903BC

(50mm)

2-7/8"

(73mm)

(50mm)

ESCUTCHEON DIA.

6-7/16" x 2-1/2"

(164mm x 64mm)

7-1/8"

(181mm)

10-1/2"

(267mm)

4-9/16"

(116mm)

COLD

1/2" NPT INLET

HOT

1/2" NPT INLET

3/4"(19mm)

MAX. DECK

THICKNESS

ADA

DESCRIPTION

• Metal construction with a chrome plated or brushed

chrome finish

OPERATION

• Mini blade style handles with hot and cold color indicators

• Inlet shanks will accept 3/8” ball nose connections

FLOW

• Aerator is limited to 2.0 gpm (7.6 L/m)

CARTRIDGE

• 1224 cartridge design

STANDARDS

• Third party certified by CSA to meet CSA B-125, ASME

A112.18.1M and all applicable requirements referenced

therein and complies with the applicable requirements of

ANSI A117.1

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with

the Federal Safe Water Drinking Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

Summary of content (2 pages)

PAGE 1
Specifications There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • Metal construction with a chrome plated or brushed chrome finish OPERATION • Mini blade style handles with hot and cold color indicators • Inlet shanks will accept 3/8” ball nose connections FLOW • Aerator is limited to 2.0 gpm (7.6 L/m) CARTRIDGE • 1224 cartridge design STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.
PAGE 2
Specifications DESCRIPTION • Chrome plated metal construction OPERATION • Small lever style FLOW • Aerator is limited to 2.0 gpm (7.6 L/m) CARTRIDGE • 1224 cartridge design STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.