Operating Guide
CRITICAL DIMENSIONS
(DO NOT SCALE)
Camerist™
Single Handle Lever Bar Faucet
Models: 4905 series, 86905
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Supplied with goose neck spout
• Inlet shanks will accept 3/8" ball nose connections
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Operates with less than 5 lbs. of force
FLOW
• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to CSA B125, ASME A112.18.1M, ANSI A117.1
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal
Safe Water Drinking Act
• for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 11/07
11”
(279mm)
4-5/8”
(117mm)
Escutcheon Dia.
2-1/8
(54mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
5-1/4”
(133mm)
11”
(279mm)
7-1/2”
(190mm)
NOTE: DESIGNED TO INSTALL
THRU 2 HOLES 1-1/4" (32mm) MIN. DIA.
AND 4" (102mm) ON CENTER
ADA
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com