Specification Sheet

ManualsBrandsMOEN ManualsBathChateau 4 in. 2-Handle Low-Arc Bathroom Faucet in Brushed Chrome with Drain Assembly

Specifications

DESCRIPTION

• Metal construction with nishes identied by sux

• ½" IPS connections will accept standard ball nose connection for 3/8" tubing

• Installation through 3 holes, 1" min. diameter, and 4" on center

• Includes pop-up waste assembly except in model 64922

• Includes hot and cold temperature indicators

OPERATION

• Lever handles

• Maximum handle rotation angle is 90° to full on

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)

FLOW

• Water usage is limited to the maximum ow rates as indicated by the corresponding

product markings

1.2 gpm max (4.5 L/min) at 60 psi

CARTRIDGE

• 1234 Duralast® cartridge

• Nonmetallic and stainless steel material

STANDARDS

• Third party certied at WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable

requirements referenced therein including NSF 61/9 & 372

•

Products marked with 1.2 gpm are compliant with California water eciency regulations

• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and nish defects to the original

homeowner

• 10 year limited warranty when used in a multifamily installation

• 5 year limited warranty when used in a commercial installation

Visit www.moen.com/support for complete details and limitations

OPTIONS (See Illustrated Parts page)

• Thin and thick deck mounting hardware kits available

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

1/17

CHATEAU®

Two-Handle 4" Centerset Lavatory Faucet

Models:

4925 series includes metal waste

Bulk Models ( 12 per carton):

64924 includes 50/50 waste

64922 less waste*

* Models less waste include removable plug

button in lift rod hole, and can be installed

through 2 holes, 1" min. diameter, and 4"

on center

3-1/8"

(79mm)

3-5/16"

(84mm)

2-5/8"

(67mm)

2-3/4"

(70mm)

6-3/16"

(157mm)

2-1/2"

(64mm)

4-1/4"

(108mm)

4-15/16"

(125mm)

(102mm)

on center

1/4"(6mm) Min. Deck Thickness

1-3/16"(30mm) Max. Deck Thickness

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
Specifications There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • • • Metal construction with finishes identified by suffix ½" IPS connections will accept standard ball nose connection for 3/8" tubing Installation through 3 holes, 1" min.
PAGE 2
Specifications DESCRIPTION • • • Metal construction with various finishes identified by suffix 1/2" IPS connections Includes metal pop-up type waste assembly except in model 64922 • • • Lever style handles with hot and cold color indicators Hot side counterclockwise to open (clockwise to close) Cold side clockwise to open (counterclockwise to close) • Water usage is limited to these maximum flow rates as indicated by the corresponding product markings º 1.2 gpm max (4.5L/min) at 60 psi º 1.