Technical Specifications

Towel Bars
posts are die cast from
highest quality zinc alloy (zamac).
Castings are triple plated in a
polished brass, polished chrome or
combination chrome and brass finish.
q 5318PB – 18” Towel Bar
Polished Brass Finish
Concealed Screw Mounting
5/8” Round Bar
q 5318CH (BP5318CH) – 18” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
5/8” Round Bar
q 5318CB (BP5318CB) – 18” Towel Bar
Chrome and Brass Finish
Concealed Screw Mounting
5/8” Round Bar
q BP5318SN – 18” Towel Bar
Satin Nickel Finish
Concealed Screw Mounting
5/8” Round Bar
q 5324PB – 24” Towel Bar
Polished Brass Finish
Concealed Screw Mounting
5/8” Round Bar
q 5324CH (BP5324CH) – 24” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
5/8” Round Bar
q 5324CB (BP5324CB) – 24” Towel Bar
Chrome and Brass Finish
Concealed Screw Mounting
5/8” Round Bar
q BP5324SN – 24” Towel Bar
Satin Nickel Finish
Concealed Screw Mounting
5/8” Round Bar
q 5330CH – 30” Towel Bar
Polished Chrome Finish
Concealed Screw Mounting
5/8” Round Bar
q 5330CB – 30” Towel Bar
Chrome and Brass Finish
Concealed Screw Mounting
5/8” Round Bar
“BP” skus in wholesale packaging
Cleaning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA):
800
-
882
-
0116
1.
Position the mounting template on the wa
ll in the desired location. Using a
level, align the template and tape it to the wall.
2. Place each mounting plate on the template with “UP” facing you.
3. One at a time, place each anchor screw through the mounting plate,
centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.
4. Only insert screw ½ to ¾ of the way into wall.
5. After all screws are installed, tear the template away from the wall
6. Tighten all 4 screws. Do not over tighten.
7. Assemble the towel bar and posts.
8. While assembled, position each end post with the setscrew down and place
over both mounting plates. Tighten the setscrew at the bottom of each base.
Stock Number:
______________________Towel Bar
By CSI Bath Furnishings
Materials:
Installation Instructio
ns:
Stock Numbers:
Dimensions:
18”, 24” & 30” Towel Bar
5318, 5324 & 5330
Yorkshire Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1072
Length 18" 24" 30"
Dim. "A" 21.00 27.00 33.00
Dim. "B" 19.75 25.75 31.75
Dim. "C" 15.00 21.00 27.00