Dimensions Guide

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ALIGN™
Single-Handle Lavatory Faucet
Models: 6191 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/4” MIN. DIA.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 10/13