Spec Sheet
SHOWER
1/2" CC
SUPPLY
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
45" (1143mm)/
48" (1219mm) - SHOWER
2-7/8" MAX.
(73mm)
7/8" MIN. CC & IPS (22mm)
1"
(25mm)
FLOOR LINE
1"
(25mm)
L
C
2-1/8"
(54mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
FLOOR
POSI-TEMP® VALVE
Pressure-Balancing Cycling Valve
Models: 62345
FP62345 (Includes Flush Plug)
DESCRIPTION
• Brass construction
• 1/2" CC or IPS connections
• Pressure balancing, three port, cycle valve
OPERATION
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintain selected discharge
temperature to ± 3°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1,
ASSE 1016, and all applicable requirements referenced therein
• Moen’s Posi-Temp® and Moentrol® valves with graphite composite
spools combined with Moen’s Eco-performance showerheads meet
the performance requirements of pressure and temperature
variation of ASSE1016 when tested as low as 1.5 gpm
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/14