Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATIONL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 59" braided hose
• 1/2" IPS connections will accept standard ball nose connection
for 3/8" tubing
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Spout receptor rotation is 120˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• When filling a vessel outside of the sink, the pause feature conveniently
stops the flow of water as the wand passes over the counter top
FLOW
• Flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Designed and manufactured to comply with the requirements of:
CSA B-125, ASME A112.18.1M, NSF 61 Section 9, California Proposition 65,
ANSI A117.1, ADA
• The backflow protection system in the device consists of two
independently operating check valves, a primary and a secondary which
prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
9-1/2”
(241mm)
7-3/8”
(187mm)
1-1/2”
(38mm)
max deck
9-1/8”
(231mm)
10-
7/8”
(27
6mm)
Rev. 8/13
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) MIN. DIA.
Camerist™
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7545 series