INS412A OWNER’S MANUAL TM With Under Sink Water Filtration System Model Numbers 77100, 77100W, 77100S, 77100V, 77100P, 77100CPR, 77100SL, 77100PM, 77100ST, 77100CG, 77100BP, 77100NL U.S.
PRODUCT FEATURES Optional left hand / right hand setup Includes 2 interchangeable spouts Filter life indicator light Rapid flow rate Easy to install under sink Easy to replace water filter 1 HELPLINE: 1-877-DRINK-H2O (1-877-374-6542) INS412A
WELCOME TO MOEN Congratulations on your purchase of the PureTouch® AquaSuite™ Under Sink Water Filtration System! This water filtration system is designed to provide great tasting, cleaner water where and when you want it. To get the most enjoyment from your PureTouch AquaSuite, please read all installation and operating instructions carefully. With simple care and maintenance, the AquaSuite will provide many years of reliable performance.
WATER FILTRATION SAFEGUARDS Your Moen PureTouch® AquaSuite System utilizes carbon block filtration made by Culligan®. This technology is fast and effective at reducing contaminants commonly found in water and is certified by NSF® International. To ensure optimal operation of your new PureTouch filtration system, please read the following safeguards carefully.
PARTS DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 INS412A Mounting Tool Spout Nut T Fitting + Stop Valve Mounting Hardware Pack High Profile Spout Low Profile Spout Spout Tip Hose Assemblies (2) Escutcheon w/Filter Life Indicator and LED Wire Handle Insert w/ O-Ring Valve Body w/ Mounting Shank Filter Life Indicator Module w/ Mounting Bracket Filter Assembly HELPLINE: 1-877-DRINK-H2O (1-877-374-6542) 4
PRE-INSTALLATION TIPS Recommended tools: Safety glasses, flash light, drill w/ 1" circular hole saw, punch (optional), phillips screw driver, thread seal tape, 8” adjustable wrenches (2), pliers, tape measure. Kitchen Determining the location for install The PureTouch® AquaSuite can be installed near a kitchen or bathroom sink. The AquaSuite faucet may be installed either to the left or right of your current faucet.
INSTALLATION INSTRUCTIONS AquaSuite™ Faucet Installation After determining in which location you will install your PureTouch AquaSuite (may involve drilling mounting hole – see page 5), install gasket onto escutcheon and drop LED wire through mounting hole. Orient filter life indicator to the front so it will be visible during faucet use.
INSTALLATION INSTRUCTIONS Installation of Filtration Unit Determine the best location for the installation of the undersink filtration unit. Ensure that the hose connections will reach from the water supply to the water inlet on the filter unit, and the hose connection from the water outlet of the filter unit up to the connection under the faucet. Make sure water supply is turned off before proceeding. CAUTION: Risk of property damage. Do not install unit where the temperature may drop below freezing.
INSTALLATION INSTRUCTIONS 2. Screw one end of the Hose Assembly (8) onto the T-Fitting. Hold the T-Fitting while tightening the Hose Assembly Nut. 3. Finally, connect the sink’s cold water supply line to the remaining open end of the T-Fitting.
INSTALLATION INSTRUCTIONS Stop valve LED Wire connection 13 When determining the location of the bracket make sure you leave at least 1–1/2" of free space from the floor surface to the bottom of the filter (13) (or 15" from floor to the underside filter connection of the Filter Life Indicator Module (12)), and at least 4" of space on both sides to make the hose connections. 1.
FILTER INSTALLATION / REPLACEMENT 1. The filter needs to be replaced when the Filter Life Indicator Light begins to flash red. A flashing amber light indicates less than 8% filter life remaining. 2. Turn off water pressure by closing the Stop Valve located next to the Filter Life Indicator Module (12). Turn lever of stop valve to form a 90° angle with the hose. Open position of stop valve shown below. CAUTION: The Stop Valve must be closed before removal of filter. 3.
FILTER INSTALLATION / REPLACEMENT Reset Button 9. Reset the Filter Life Indicator Module by pushing the reset button on the Filter Life Indicator Module (12). 10.A new filter must be flushed with cold water for 5 minutes after it is installed. This procedure helps clean the filter of loose carbon particles. The Filter Life Indicator Lights will alternate green and amber until flushing is complete. Once completed, the light will change to flashing green. 11.Filter replacement complete.
OPERATING INSTRUCTIONS Controlling the Water Turn the handle on the valve body 1/4 turn clockwise to activate water flow. Return valve to original position to shut off water flow. CAUTION: Only filter cold water. Do not filter water above 100° F. Electronic Indicator The flashing light on the Filter Life Indicator Module provides information regarding the performance of the filter. The indicator provides you with information throughout the life of the filter.
BATTERY REPLACEMENT Replace battery when no light appears. Locate battery compartment on the Filter Life Indicator Module (12). Pull out battery holder and replace battery. Keep the battery and battery compartment dry. The electronic indicator will retain the correct filter life information when the battery tray is removed and replaced. A new battery should last up to 2 years under normal operating conditions.
FAUCET DISASSEMBLY Cartridge 3. Grasp the stem of the cartridge with pliers and pull straight out. This will remove the cartridge as one unit. For reassembly reverse the steps above. . CAUTION: Be careful not to damage the rubber seals when reinstalling cartridge.
TROUBLESHOOTING PROBLEM: Filter life indicator is still red after installing a new filter. POSSIBLE CAUSES: Filter life indicator was not reset. SOLUTION: Perform reset sequence. PROBLEM: Slow or uneven water flow. POSSIBLE CAUSES: The filter has been installed for too long. SOLUTION: Recommend replacement of the filter every six months. Replace the filter. PROBLEM: Slow or uneven water flow. POSSIBLE CAUSES: The filter has become clogged. SOLUTION: Replace the filter.
PURETOUCH® AQUASUITE™ FILTERING SYSTEM WARRANTY Definitions: “Faucet” – That part of the Pure Touch AquaSuite Filter System that includes all parts installed above the sink. (numbers 2, 5-7, 9-11; See “Parts Description” on page 4). “Filtering Unit” – All undersink parts including Filter bracket, Electronics, Hoses, etc. (numbers 3-4, 8, 12; See “Parts Description” on page 4).
NOTES 17 HELPLINE: 1-877-DRINK-H2O (1-877-374-6542) INS412A
