Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Camerist™
Single Handle Lever Kitchen Faucet
Models: 7840 series
7825 series (without spray)
67840 series (bulk pack)
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
• Includes side spray with Hydrolock® quick connect system
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
FLOW
• Spout flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
• Diverted flow at sidespray limited to 2.0 gpm max (7.6L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9
• Meets Calgreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
8-1/8”
(206mm)
4-1/2”
(114mm)
2-3/8”
(60mm)
9-1/4”
(235mm)
8-1/2”
(216mm)
6-1/8”
(156mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
FOR SIDE
SPRAY
31-1/2"
(800mm)
NOTE: DESIGNED TO INSTALL THROUGH
1 HOLE, 1-1/4" (32mm) MIN. DIA. OR 2 HOLES
1-1/4” (32mm) MIN. DIA. AND 4" ON CENTER
Rev. 6/13
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.