Dimensions Guide

ManualsBrandsMoen ManualsCommercial Kitchen Faucets8119

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

www.moen.com

C O M M E R C I A L

There is more than 1 version of this model.

Page down to identify the version you have.

Two-Handle Wall Mount Faucet

Model: 8119

(for models after 3/2011)

Rev. 2/12

4-1/2”

(114mm)

FINISHED WALL

1/2" INLET

2-3/8"

(60mm)

7"(178mm)

2-1/2"

(64mm)

(102mm)

Centers Adjust from

7-5/8"

(194mm) to 8-3/8" (213mm)

2-15/16"

(75mm)

13"

(330mm)

12"

(305mm)

3-1/8"

(79mm)

FAUCET DESCRIPTION

• Chrome plated brass construction

• 1/2" IPS connections

OPERATION

• Lever style handles with hot and cold color indicators and

vandal resistant screws

CARTRIDGE

• Ceramic disc cartridge

• Nonmetallic and nonferrous material

• 1/4 turn operation

STANDARDS

• Designed and manufactured to comply with the requirements of:

ASME A112.18.1/CSA B-125.1 and all specifications referenced therein

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handles

WARRANTY

• Warranted for 5 years against material or manufacturing defects

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s COMMERCIAL There is more than 1 version of this model. Page down to identify the version you have. FAUCET DESCRIPTION • • Chrome plated brass construction 1/2" IPS connections OPERATION • Lever style handles with hot and cold color indicators and vandal resistant screws CARTRIDGE • • • Ceramic disc cartridge Nonmetallic and nonferrous material 1/4 turn operation STANDARDS • • • • • Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA B-125.
PAGE 2
S p e c i f i c a t i o n s COMMERCIAL FAUCET DESCRIPTION • • Chrome plated brass construction 1/2" IPS connections OPERATION • 4” wrist blade handles with hot and cold color indicators and vandal resistant screws CARTRIDGE • • • Ceramic disc cartridge Nonmetallic and nonferrous material 1/4 turn operation STANDARDS • • • • • Designed and manufactured to comply with the requirements of: ASME A112.18.1/CSA B-125.