Dimensions Guide

ManualsBrandsMoen ManualsCommercial Kitchen Faucets8126

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

www.moen.com

C O M M E R C I A L

There is more than 1 version of this model.

Page down to identify the version you have.

Two-Handle Wall Mount Faucet

Model: 8126

For Models After 3/2011

Rev. 2/12

4-1/2”

(114mm)

FINISHED WALL

1/2" INLET

3-7/8"

(98mm)

8-5/8"(219mm)

4-1/8"

(105mm)

(102mm)

centers adjusts from

7-5/8" (194mm)

to 8-3/8" (213mm)

2-15/16"

(75mm)

16-1/4"

(413mm)

8" (204mm)

12"

(306mm)

DESCRIPTION

• Chrome plated brass construction

• Less spout

• 1/2" IPS connections

OPERATION

• 4" wrist blade handles with hot and cold color indicators and

vandal resistant screws

CARTRIDGE

• Ceramic 28mm cartridge design

• Nonmetallic and nonferrous material

• 1/4 turn operation

STANDARDS

• Designed and manufactured to comply with the requirements of:

CSA B125.1, ASME A112.18.1 and all specifications referenced

therein and complies with the requirements of ANSI A117.1

• Contains no more than 0.25% weighted average lead content

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and the Federal Safe

Drinking Water Act

• ADA for lever handles

WARRANTY

• Warranted for 5 years against material or manufacturing defects

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s COMMERCIAL There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • Chrome plated brass construction Less spout 1/2" IPS connections OPERATION • 4" wrist blade handles with hot and cold color indicators and vandal resistant screws CARTRIDGE • • • Ceramic 28mm cartridge design Nonmetallic and nonferrous material 1/4 turn operation STANDARDS • • • • • Designed and manufactured to comply with the requirements of: CSA B125.
PAGE 2
S p e c i f i c a t i o n s COMMERCIAL DESCRIPTION • • • Chrome plated brass construction Less spout 1/2" IPS connections OPERATION • 4" wrist blade handles with hot and cold color indicators and vandal resistant screws CARTRIDGE • • • Ceramic 28mm cartridge design Nonmetallic and nonferrous material 1/4 turn operation STANDARDS • • • • Designed and manufactured to comply with the requirements of: CSA B125.1, ASME A112.18.