Specification Sheet
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Adjustable temperature limit stop
• For use with a Posi-Temp® pressure-balancing valve
• Includes showerhead, arm and flange
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚ arc with off at
6 o'clock and maximum hot at the 9 o'clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2˚
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) for models prior to 10/2013
• EP suffix models and models after 10/2013, showerheads limited to 2.0 gpm
(7.6 L/min) maximum, and 1.5 gpm (5.7 L/min) minimum at 45 psi
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein
• for lever handle
• Meets WaterSense® criteria for EP suffix models and models after 10/2013
• Meets New York City Local Law No. 57 for EP suffix models and models after 10/2013
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CALDWELL™
Single-Handle Shower
Models: 82495 series
3-1/2"
(90 mm)
6'-6"
(1981 mm)
Nomimal
C
L
Shower
45" (1143 mm)/
48" (1219 mm)
2-1/2" Max.
(63 mm)
1/2" (13 mm) Min. CC
5/8" (16 mm) Min. IPS
2" (51 mm) CC
1-7/8" (48 mm) IPS Max. Wall
Face of Stud
Finished Wall Line
Floor Line
3-1/2" (90 mm) Max.
2-1/4" (57mm) Min.
3/6" (typ) (5mm)
Plaster Ground
Floor Line
Plastic
Tub/Shower
Surround
7”
(178mm)
3-1/16”
(78mm)
2-1/2”
(63mm)
THIN WALL APPLICATION
THICK WALL APPLICATION
ADA
Rev. 8/13
(For EP suffix models and
models after 10/2013)