Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
4/12
M-Bition®
Single-Handle Lavatory Faucet
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" IPS connections or flex supply lines (3/8"
compression fittings)
• Includes metal pop-up type waste assembly or metal grid
strainer where noted
OPERATION
• Pivot action lever style handle in 3" and 4"
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi or
0.5 gpm max. & .35 max. models available
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, (only applies to
1.5 gpm), CSA B125.1, ASME A112.18.1 and all applicable
requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(25mm)
1/2" IPS
ADAPTER
2"
(25mm)
DECK PLATE
Lift
Rod
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
4-3/8"
(111mm)
7" (178mm)
OPEN POSITION
4"
(101mm)
2"
(51mm)
ESC.
WIDTH
2"
(51mm)
4-3/8"
(111mm)
7" (178mm)
OPEN POSITION
3" Handle Version 4" Handle Version
MODEL LEVER HANDLE SIZE FLOW CONNECTION TYPE DRAIN
8439 3" 1.5 Flex Supply Lines w/out
8437 3" 1.5 Flex Supply Lines Metal
8430 3" 1.5 IPS w/out
8432 3" 1.5 IPS Metal
8434 3" 1.5 IPS Grid
8439F05 3" 0.5 Flex Supply Lines w/out
8430F05 3" 0.5 IPS w/out
8430F03 3" 0.35 IPS w/out
8422 4" 1.5 Flex Supply Lines w/out
8400 4" 1.5 IPS w/out
8420 4" 1.5 IPS Metal
8425 4" 1.5 IPS Grid
8422F05 4" 0.5 Flex Supply Lines w/out
8422F03 4" 0.35 Flex Supply Lines w/out
Models: 8400 series
NOTE:
THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3-1" DIA. HOLES, 2" ON CENTER