Installation Sheet

1 ¼” Grab Bar
rods are formed from
18-gauge (.049)
type 304 stainless steel
tubing.
q
DN8712
12” Grab Bar
Satin Finish, 1 ¼” Bar,
Concealed Screw Mounting
q 8716CB, R8716PB 16” Grab Bar
1 ¼” Bar, Concealed Screw Mounting
q 8718, R8718PS, R8718PB, R8718W
18” Grab Bar
or White Finish, 1 ¼” Bar,
Concealed Screw Mounting
q 8724, R8724PS, 8724CB, R8724PB,
R8724W 24” Grab Bar
Satin, Polished Stainless, Chrome &
Brass, Polished Brass, or White Finish,
1 ¼” Bar, Concealed Screw Mounting
q 8730 30” Grab Bar
Satin Finish, 1 ¼” Bar,
Concealed Screw Mounting
q 8732 32” Grab Bar
Satin Finish, 1 ¼” Bar,
Concealed Screw Mounting
q R8736PS, R8736PB, R8736W
36” Grab Bar
Polished Stainless, Polished Brass or
White Finish, 1 ¼” Bar,
Concealed Screw Mounting
q 8742, R8742PS 42” Grab Bar
Satin or Polished Stainless Finish,
1 ¼” Bar, Concealed Screw Mounting
q 8748 48” Grab Bar
Satin Finish, 1 ¼” Bar,
Concealed Screw Mounting
25300 AL MOEN DRIVE NORTH OLMSTED, OH 44070 (800) 321-8809
FAX: (800) 848-6636 INTERNATIONAL: (440) 962- 2000
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
5. Snap flange covers into place.
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry Plastic or Lead Anchors;
Plaster/Drywall Toggle Bolts.
Stock Number:
____________________1 ¼” Grab Bars
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ¼” Grab Bars – Concealed Screw
8700
Home Care Technical Specification
Copyright CSI Bath Furnishing Division of Moen 02/22/01
A
B
C
8712
12" 8.375 15.5
8716
16" 12.375 19.5
8718
18" 14.375 21.5
8724
24" 20.375 27.5
8730
30" 26.375 33.5
8732
32" 28.375 35.5
8736
36" 32.375 39.5
8742
42" 38.375 45.5
8748
48" 44.375 51.5

Summary of content (1 pages)