Dimensions Guide

ManualsBrandsMoen ManualsBar & Prep Faucets87682SRS

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supplies with 3/8" compression fittings

OPERATION

• Lever style handle

• Operates with less than 5 lbs. of force

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

• Nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified to CSA B-125.1, ASME A112.18.1

and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

CRITICAL DIMENSIONS

(DO NOT SCALE)

Single Handle Lever Kitchen Faucet

with Liquid Soap Dispenser

Models: 87682 series

5-1/2"

(140mm)

6-1/2"

(165mm)

2-3/16"

(56mm)

2-1/2" (63mm)

MAX DECK

THICKNESS

(203mm)

8-1/8"

(206mm)

12-1/4"

(311mm)

29-1/2"

(750mm)

2-5/16"

(58mm)

1-1/4" (32mm)

THRU HOLE

1-1/2" (38mm)

THRU HOLE

4/11

Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THROUGH 4 HOLES 1-1/4" (32mm) MIN. DIA. AND

4" (102mm) ON CENTER.

Also has single hole mount capability.

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Summary of content (1 pages)

PAGE 1
S p e c i f i c a t i o n s FAUCET DESCRIPTION • • Metal construction with various finishes identified by suffix Flexible supplies with 3/8" compression fittings OPERATION • • Lever style handle Operates with less than 5 lbs. of force FLOW • Aerator is limited to 2.2 gpm max (8.3 L/min) CARTRIDGE • • 1255™ Duralast™ cartridge for Single-Handle Faucets Nonmetallic/nonferrous and stainless steel material STANDARDS • • • • • Third party certified to CSA B-125.1, ASME A112.18.