Specification

M•PACT VALVE

Widespread Lavatory Rough-in Valve

Models: 9000, 69000

(69000-Bulk Packed 6 per carton)

NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT

#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.

NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.

VALVES INSTALL THROUGH 1-1/8” MIN. DIA. HOLE.

NOTE: MAXIMUM HOLE DIA. 1-1/2"

DESCRIPTION

• Hydrolock™ quick connect system

• Brass construction

• 1/2" IPS connections

• Includes pop-up waste assembly

OPERATION

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)

CARTRIDGE

• 1224 cartridge design with nonmetallic and stainless steel materials

STANDARDS

When Trim Kit is added to M•Pact valve, the product is:

• Third party certified to meet CSA B125.1, ASME A112.18.1 and all

applicable requirements referenced therein including NSF61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to

the original consumer purchaser

• 5 year warranty if used in commercial installations

1-1/4" (32mm)

MAX DECK

THICKNESS

8" (203mm)

16"(406mm) CENTERS

Quick

Connect

Hose

Assembly

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 6/13

PAGE 1
S p e c i f i c a t i o n s DESCRIPTION • • • • Hydrolock™ quick connect system Brass construction 1/2" IPS connections Includes pop-up waste assembly OPERATION • • Hot side counterclockwise to open (clockwise to close) Cold side clockwise to open (counterclockwise to close) CARTRIDGE • 1224 cartridge design with nonmetallic and stainless steel materials STANDARDS When Trim Kit is added to M•Pact valve, the product is: • Third party certified to meet CSA B125.1, ASME A112.18.