Specification

25300 AL MOEN DRIVE
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 FAX: (800) 848- 6636
INTERNATIONAL: (440) 962- 2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006 Literature #BA1350
Oval Tilting Mirror
posts are
constructed of zinc and mirror is
constructed of 5MM thick glass.
q
DN
269
2BN
Oval Tilting Mirror
Brushed Nickel Finish
q DN2692CH Oval Tilting Mirror
Chrome Finish
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 5/16” holes at each mounting post location.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor. Remove pin and repeat on all anchors.
8. Remove mounting plates from the product assemblies by loosening each
setscrew.
9. One at a time, place each mounting plate over anchors (with “UP” facing
you) and insert screws through plate into anchors.
10. Tighten screws.
11. Loosen the 2 small screws on each of the end posts.
12. With the back of the mirror facing you, slide both end posts into position on
the mirror. Align the screws with the holes in the back plates. Tighten all 4
screws.
13. Place entire mirror assembly over the mounting plates on the wall
(setscrews facing down). Tighten setscrews.
___________________Oval Tilting Mirror
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Oval Tilting Mirror
DN
26
92
Glenshire™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Summary of content (1 pages)