Instructions / Assembly

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
WWW.MOEN . C OM
Copyright Creative Specialties International
Vanity Shelves are constructed of
wrought iron and glass. Black finish
is powder coated.
 DN4990BK –Glass Shelf
Black Finish
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location. Using a level,
align the template and tape it to the wall.
2. Remove the mounting bracket from the body by loosening the setscrew.
3. Place each mounting plate on the template with “UP” facing you.
4. One at a time, place each anchor screw through the mounting plate, centered in
each large hole. Using a Phillips screwdriver, turn the anchor screw while applying
pressure. Screw will self drill and tap into drywall. Do not over tighten.
5. Only insert screw ½ to ¾ of the way into wall.
6. After all screws are installed, tear the template away from the wall
7. Tighten all 4 screws. Do not over tighten.
8. Assemble the two bars into the posts. The front bar has a twist. The back bar is
straight.
9. Orient the front bar so the two brackets are on the bottom pointing towards the
wall. The non-slip pads on the shelf brackets should be horizontal and facing up.
10. Tighten the setscrew on the bottom of each post to secure the front bar.
11. Place the assembled product over the mounting brackets on the wall (setscrew
down). Tighten the setscrew on each base.
12. If necessary, adjust the position of the front bar by loosening the setscrew and
rotating the bar to desired position. The non-slip pads on the shelf brackets should
be horizontal and facing up. Tighten the setscrews.
13. Place glass shelf on to the assembly with the two rounded corners closest to the
wall.
Stock Number:______________________Vanity Shelf
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
DN4990
Sienna® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1100