Installation Guide

Danbury Technical Specication
DN6708
Paper Holder
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ DN6708CH – Paper Holder
Chrome Finish
☐ DN6708ORB – Paper Holder
Oil Rubbed Bronze Finish
☐ DN6708BN – Paper Holder
Brushed Nickel Finish
Paper Holder post is constructed of zinc.
Arm is brass.
Stock Number: Paper Holder
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch
facing down.
3. One at a time, place each anchor screw through the 2 large mounting
post holes, centered in the large hole. Using a Phillips screwdriver, turn
the anchor screw while applying pressure. Screw will self drill and tap
into drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten setscrew.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
3.440
(87.38)
2.875
(73.03)
2.380
(60.45)
4.065
(103.25)
6.328
(160.74)
.250
(6.35)