Specification Sheet

Paper Holder
post is constructed of
zinc. Arm is brass.
q
DN6708CH
–
Paper Holder
Chrome Finish
q DN6708ORB – Paper Holder
Oil Rubbed Bronze Finish
q DN6708BN – Paper Holder
Brushed Nickel Finish
Cleaning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1.
Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the 2 large mounting post
holes, centered in the large hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten setscrew.
Stock Number:
______________________Paper Holder
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
DN6708
Danbury Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1139