Full Product Manual

Prime1
Towel Ring post is constructed of
zinc. Ring is brass.
 DN6786BN – Towel Ring
Brushed Nickel Finish
 DN6786ORB – Towel Ring
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN DRIVE  NORT H OLMST ED, OH 4 4 0 7 0 (80 0 ) 3 2 1 -8809 
FAX : [phone]  INT ERNAT IONAL : (440) 962 -2000 
FAX : [phone] CUST OM ER SE RVICE (USA ): 800 -882-0116
WWW.M OEN.COM
©Co p yri g h t Crea ti ve Speci al ti e s Interna ti onal Li terature #BA1141
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the 2 large mounting post
holes, centered in the large hole. Using a Phillips screw driver, turn the
anchor screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten set screw.
Stock Number:______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN6786
Danbury® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.