Installation Guide

Danbury Technical Specication
DN6786
Towel Ring
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ DN6786CH – Towel Ring
Chrome Finish
☐ DN6786ORB – Towel Ring
Oil Rubbed Bronze Finish
☐ DN6786BN – Towel Ring
Brushed Nickel Finish
Towel Ring post is constructed of zinc.
Ring is brass.
Stock Number: Towel Ring
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch
facing down.
3. One at a time, place each anchor screw through the 2 large mounting
post holes, centered in the large hole. Using a Phillips screw driver, turn
the anchor screw while applying pressure. Screw will self drill and tap
into drywall. Do not over tighten.
4. Place skirt over mounting post.
5. Then place post assembly or robe hook over mounting post and skirt with
setscrew facing down.
6. Tighten set screw.
To preserve the ne nish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
3.000
(76.2)
2.380
(60.45)
6.000
(152.4)
.375
(9.53)
3.440
(87.38)