Specification

Robe Hook is constructed of zinc.
 DN6803CH – Robe Hook
Chrome Finish
 DN6803BN – Robe Hook
Brushed Nickel Finish
 DN6803ORB – Robe Hook
Oil Rubbed Bronze Finish
Cleaning Instructions:
1. Remove the mounting post from the body by loosening the setscrew.
2. Position the mounting post on the wall at desired location with notch facing
down.
3. One at a time, place each anchor screw through the mounting post, centered
in the large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall. Do not over
tighten.
4. Place assembly over the mounting post, setscrew facing down.
5. Tighten setscrew.
Stock Number:______________________Robe Hook
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
DN6803
Sage® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  F AX: (440) 962 -2726
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: (888) 379 -2720
W W W . MOEN . COM
Copyright Creative Specialties International Literature #BA1144