Installation Guide

Paper Holder posts are constructed
of zinc. CH roller is aluminum. BN &
ORB roller is brass.
 DN6808CH – Paper Holder
Chrome Finish
 DN6808BN – Paper Holder
Brushed Nickel Finish
 DN6808ORB – Paper Holder
Oil Rubbed Bronze Finish
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. One at a time, place each anchor screw through the mounting post, centered
in the large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
5. Only insert screw ½ to ¾ of the way.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 the screws. Do not over tighten.
8. Place each end post over the mounting post (setscrew down). Tighten both
setscrews.
9. Compress the paper holder bar and place into posts.
Stock Number:______________________Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
DN6808
Sage® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN D RI VE  N OR TH OLMSTED, OH 44070
C ORPOR ATE HEAD QU ARTER S: [phone]  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SERVI C E (USA): 800 -882-0116  F AX: [phone]
W W W. MOEN . COM
Copyright Creative Specialties International Literature #BA1145