Installation Guide

Bath Grip rods are type-304 stainless
steel. Posts are cast from highest
quality zinc alloy (zamac).
 R2250 – 9” Bath Grip
Polished Chrome Finish, ⅞” Rod,
Exposed Screw Mounting
 R2250W – 9” Bath Grip
White Finish, ⅞” Rod,
Exposed Screw Mounting
 R2260 – 16” Bath Grip
Polished Chrome Finish, ⅞” Rod,
Exposed Screw Mounting
 R2260W – 16” Bath Grip
White Finish, ⅞” Rod,
Exposed Screw Mounting
 R2270 – 24” Bath Grip
Polished Chrome Finish, ⅞” Rod,
Exposed Screw Mounting
 R2270W – 24” Bath Grip
White Finish, ⅞” Rod,
Exposed Screw Mounting
A
B
C
2250
6.5"
7.75"
11"
2260
13.5"
14.75"
18"
2270
21.5"
22.75"
26"
25300 AL M OEN DRIVE  NORT H OLM ST ED, OH 4 4 0 7 0 (80 0 ) 321 -8809 
FA X: (800) 848 -6636  INT ERNAT IONAL: (440) 962 -2000 
FA X: (440) 962 -2 7 2 6 CUS T OM ER SERVICE (USA): 8 00-882-0116
WWW.MOEN.COM
1. Position assembled unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount assembled unit on wall using 2” screws (provided).
Note: Wood blocking is preferable behind all wall surfaces. If
wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors;
Plaster/Drywall – Toggle Bolts.
Stock Number:_______________________Bath Grip
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Bath Grips
2200
Home Care Technical Specification
©Copyright Creative Specialties International
Literature #BA1680