Specification Sheet

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1676
1 ¼” Peened grab bar rods are formed
from type 304 stainless steel tubing w ith a
satin finish.
12” – 42” length is 20 gauge
48” length is 18 gauge
 R8712P, LR8712P – 12” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8716P – 16” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 LR8716P - 16” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8718P, LR8718P – 18” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8724P, LR8724P – 24” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8730P – 30” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8732P – 32” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8732P - 32” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8736P – 36” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8742P – 42” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
 R8748P – 48” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ¼” Diameter Bar
Stock Number:______________________Grab Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ¼” Peened Grab Bar – Concealed Screw
R8700P
Home Care Technical Specification
Compliance:
- ADA, ANSI, ASTM, CSA
- Tested to 500 lbs. pull
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
5. Snap flange covers into place.
Note: SecureMount Anchors are recommended for use in non-stud
(hollow-wall) applications per installation instructions. (Secure Mount
Anchors are sold separately)
A
B
C
R8712P
12
8.75
15.25
R8718P
18
14.75
21.25
R8724P
24
20.75
27.25
R8730P
30
26.75
33.25
R8736P
36
32.75
39.25
R8742P
42
38.75
45.25
R8748P
48
44.75
51.25