Full Product Manual

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800- 882- 0116 • FAX: [phone]
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International
1 ½” Peened Grab Bar rods are formed from
20-gauge type-304 stainless steel tubing with a
satin finish.
q R8912P – 12” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8918P – 18” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8924P – 24” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8930P – 30” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8932P – 32” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8936P – 36” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8942P – 42” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8948W – 48” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q 8992 – 16”x32” L Shaped Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q 8994 – 24”x36” L-Shape ” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q 8996 – 24”x48” L-Shape Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2 ¼” screws (provided).
5. Snap flange covers into place.
Note: SecureMount Anchors are recommended for use in non-stud (hollow-wall)
applications per installation instructions.
Stock Number:
______________________Grab Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ½” Peened Grab Bar – Concealed Screw
R8900
Home Care Technical Specification
Compliance:
- ADA, ANSI, ASTM, CSA
- Tested to 500 lbs. pull
Dim. A
Dim. B
Dim. C
R8912P 12.00 8.86 15.14
R8918P 18.00 14.86 21.14
R8924P 24.00 20.86 27.14
R8930P 30.00 26.86 33.14
R8936P 36.00 32.86 39.14
R8942P 42.00 38.86 45.14