Specification Sheet
25300 AL MO E N D R I VE NO RTH O L M S TE D, OH 4 4 0 70
CO R P O RAT E HE A D Q U A RT ER S : ( 8 00 ) 3 2 1 -88 0 9 FAX: (800) 8 4 8 - 6 6 36
IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00 F A X: ( 4 4 0 ) 962 -2726
CU S T O M ER S ER V ICE ( US A): 800 -882 - 0 1 1 6 FA X: ( 88 8 ) 3 7 9 - 2720
W WW . MO E N .C O M
Copyright Creative Specialties International Literature #BA1677
1 ½” Peened Grab Bar rods are formed
from 20-gauge type-304 stainless steel
tubing with a satin finish.
12-42” length is 20 gauge
48” length is 18 gauge
R8912P – 12” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8916P, LR8916P – 16” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8918P, LR8918P – 18” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8924P, LR8924P – 24” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8930P – 30” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8932P, LR8932P – 32” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8936P, LR8936P – 36” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8942P, LR8942P – 42” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
R8948P – 48” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2” screws (provided).
5. Snap flange covers into place.
Note: SecureMount Anchors are recommended for use in non-
stud (hollow-wall) applications per installation instructions.
Stock Number:______________________Grab Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ½” Peened Grab Bar – Concealed Screw
R8900P
LR8900P
Home Care Technical Specification
Compliance:
- ADA, ANSI, ASTM, CSA
- Tested to 500 lbs. pull
A
B
C
R8912P
12”
8.75
15.25
R8916P
16”
12.75
19.25
R8918P
18”
14.75
21.25
R8924P
24”
20.75
27.25
R8930P
30”
26.75
33.25
R8932P
32”
28.75
35.25
R8936P
36”
32.75
39.25
R8942P
42”
38.75
45.25
R8948P
48”
44.75
51.25
1.50 – 1.56