Specification Sheet
6-3/16"
(157mm)
14-5/8"
(371mm)
5-5/16"
(135mm)
7-7/8"
(200mm)
2-1/2" (63mm)
Max Deck Thickness
2-1/4"
(57mm)
7"
(178mm)
2-1/4"
(57mm)
31-5/8"
(803mm)
3-3/4"
(95mm)
1-1/8"
(27mm)
1-3/16"
(28mm)
STō
Single Handle High Arc
Pulldown Prep/Bar Faucet
Models: S62308 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1 HOLE, 11/2” 38mm MIN. DIA.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
• Power Clean™ spray technology
• Metal construction with various finishes identified by suffix
• Duralock™ quick connect
• Pulldown spray with 68” braided hose
• Flexible supply lines with 3/8” compression fittings
• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides maneuverability for food preparation tasks
• 360˚ rotating spout
• Faucet designed for handle to be mounted on right side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CRITICAL DIMENSIONS
DO NOT SCALE
Rev. 7/18
There is more than one version of this model.
Page down to identify the version you have.