Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
90 DEGREE™
Single-Handle Vessel Lavatory Faucet
Model: S6711
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
2-1/2"
(80mm)
MAX.
1-11/16”
(43mm)
11-11/16”
(296mm)
2-3/16”
(56mm)
18”
(458mm)
4-1/4”
(108mm)
9-1/8”
(232mm)
12-11/16”
(321mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, NSF 61/9,
ICC A117.1 and all applicable requirements referenced therein
• Contains no more than 0.25% weighted average lead content
• Third party certified to comply with WaterSense® High Efficiency
Bathroom Sink Faucet Specification
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
2/11