Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finished identified by suffix
• Installed on 6" (152mm) to 16" (406mm) centers
• 1/2" IPS connections
• Diverter valve includes an integral vacuum breaker
• Includes metal pop-up type waste assembly
• Includes hot and cold indicators
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Water flow is diverted by turning the knob counterclockwise
for fill and clockwise for rosetta spray
CARTRIDGE
• 116719 diverter cartridge
• 1234 cartridge design for hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1,
and all requirements referenced therein
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
BRANTFORD™
Two Handle Bidet with Metal Waste
Assembly
Models: T5225 series
Valve: 9265
NOTE: Minimum Diameter Holes for Installation
Diverter Valve - 1-1/8" (29mm)
Handle Valves - 1-1/8" (29mm)
Spray Nozzle - 5/8" (16mm)
Lift Rod Escutcheon - 1/2" (13mm)
31/2"
89mm
21/8"
53mm
51/8"
130mm
23/16"
55mm
3"
(76mm)
MIN.
6" (152mm) MIN.
16" (406mm) MAX
1-1/4" 32MM MAX
DECK THICKNESS
7/8" 22MM MAX
DECK THICKNESS
2"
(51mm)
DIAMETER
2"
(51mm)
DIVERTING
MECHANISM
SPRAY
NOZZLE
4/15
There is more than 1 version of this model
Page down to identify the version you have