Dimensions Guide

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

7/14

WYNFORD™ MOENTROL®

Single-Handle Tub/Shower Trim Only

Models: T5501 series - valve trim only

T5502 series - shower trim only

T5503 series - tub/shower trim

Valves: 63100, 3500 Series

(178mm)

7-15/16"

(202mm)

3-7/16"

(87mm)

FAUCET DESCRIPTION

• Metal construction with varoius finishes idenditfied by suffix

OPERATION

• Lever style handle with temperature indicator on the

escutcheon, pull-on/push-off operation

• Temperature operates through an 180° arc of handle

travel (full cold to full hot)

• Adjustable temperature limit stop to control maximum

hot water temperature

• Pressure balancing mechanism maintains selected

discharge temperature to ± 2°

FLOW

• Showerhead limited to 2.5 gpm (9.5 L/min)

CARTRIDGE

• 1225® cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certified to ASME A112.18.1M/CSA B-125,

and all applicable requirements referenced therein

• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish

defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

M•pact System

PAGE 1
Speci fic at ions FAUCET DESCRIPTION • Metal construction with varoius finishes idenditfied by suffix OPERATION • Lever style handle with temperature indicator on the escutcheon, pull-on/push-off operation • Temperature operates through an 180° arc of handle travel (full cold to full hot) • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead limited to 2.5 gpm (9.