Dimensions Guide

ManualsBrandsMoen ManualsBathEva Chrome 2-Handle Widespread WaterSense Bathroom Sink Faucet

KINGSLEY™

Two-Handle Widespread Lavatory

Faucet

Models: T6125 series

Valve: 9000, 69000

NOTE: THIS FAUCET IS DESIGNED TO BE

IN STALLED THRU 3 HOLES, 1-1/8" MIN. DIA.

2-7/8"

(73mm)

4-7/16"

(113mm)

8" (203mm) - 16"(406mm)

CENTERS

2-7/8"

(73mm)

1-1/4" (32mm) MAX.

DECK THICKNESS

HANDLE BASE

2-7/16" (62mm)

DIAMETER

COLD

INLET

HOT

INLET

1-3/8"

(35mm)

5-1/8"

(130mm)

(178mm)

SPOUT BASE DIA.

2-1/2" (64mm)

DESCRIPTION

• Duralock™ quick connect system

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes hot and cold indicators

• Includes metal pop-up waste assembly

OPERATION

• Lever style handles

• Maximum handle rotation angle is 90˚ to full on for either handle

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)

FLOW

• Water usage is limited to these maximum flow rates as indicated by the

corresponding product markings

° 1.2 gpm max (4.5L/min) at 60 psi

° 1.5 gpm max (5.7L/min) at 60 psi

CARTRIDGE

• 1234 cartridge design with nonmetallic and stainless steel materials

STANDARDS

• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all

applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water

efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 1/16

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • • • Quick connect system Metal construction with various finishes identified by suffix 1/2" IPS connections Includes hot and cold indicators Includes metal pop-up waste assembly OPERATION • • • • Lever style handles Maximum handle rotation angle is 90˚ to full on for either handle Hot side counterclockwise to open (clockwise to close) Cold side clockwise to open (counterclockwise to close) KINGSLEY™ FLOW • Flow is limited to 1.5 gpm max (5.